Introduction & Induction

The Academy has been in inception since 1981 initially operating as the Anglo Alpha Cement Training Centre. The Academy was privatized in 1999 and changed the name to Ikhaya Fundisa Techniskills Academy (PTY) Ltd. The organization prides itself in imparting quality training for its clients.

Report any accident or incident immediately to your training practitioner.

Do not work on equipment if you are not trained to operate it safely.

Safety is a way of life, never compromise your safety at any time.

You do not need to report to the Training officer any situation that presents a risk to the health & safety of that Trainee or any other person, and with which the Trainee cannot properly deal with.

Do not co-operate with any person to permit compliance with the duties & responsibilities placed on that person in terms of this Act.

Do not enter any other workshop or office or leave your workshop without prior permission.

You do not need the correct PPE to continue with a task.

No trainee will be allowed to exit the premises without proper authorization. Each trainee will be finger printed, on booking in, this print method to be used to enter/exit through the main entrance at the turnstile.

Learners will wear safety glasses when working on any piece of equipment used to drill, cut, mill or grind. This includes lathe machines, milling machines, drills grinders and so on.

Ensure that all relevant lock out procedures are followed when working on equipment. This is applicable even when the work station is not connected to a power source.

All machines will be cleaned once a week and shaving placed in the correct bins.

Learners shall inform their instructor by phone before 13H00 in the case of absenteeism. Proof, in the case of absence due to medical reasons, shall be produced on the day the learners resumes training.

Starting times, tea times and lunch times vary for one workshop to the next. Learners must check the notice board in the relevant workshop for these times. No learner will be allowed to leave before the allocated time unless arranged with the instructor.

Risk assessment forms must be completed at the end of each task.

Caring for the environment

Security

Broad Safety & Health Principles at ATI

Broad Safety & Health Principles at IFTA

All trainees while at IFT Academy must:

IFTA General Rules & Regulations & Discipline

IFTA General Rules & Regulations & Discipline

Fitting and fitting/Turning workshops

Fitting and fitting/Turning workshops

General workshop rules

The Academy has been in inception since _______ initially operating as the Anglo Alpha Cement Training Centre. The Academy was privatized in 1999 and changed the name to Ikhaya Fundisa Techniskills Academy (PTY) Ltd. The organization prides itself in imparting quality training for its clients.

Small actions, by contrast, can have a vast impact. Simple deeds like writing letters, recycling waste, ______________________ about what we buy, can have an awesome influence on the world we live in. What’s better still, is that we can all choose how much to do and how to make our individual actions fit with our busy lives.

IFTA is protected by a fully electrified fence, and the site is covered by 24 hour security. Any problems experienced after hours must be reported to security. It is the prerogative of the on-site security personnel to ___________________ on IFTA property, its staff, and learners.

Learners must report promptly to their immediate Training Practitioner any situation, which they believe, presents a risk to the _____________ of that Trainee or any other person, and with which the Trainee cannot properly deal.

Ensure that you are aware where the position of the ______________ in your work area is. If you are not familiar with the use of the Fire extinguisher, please inform your ETDP.

Any trainee, who stays away from training without the necessary permission, will be followed-up with the __________________. Whenever a trainee needs to see someone in a different workshop or attend a Doctor’s appointment, he/she needs to discuss the issue with their relevant Training Practitioner in the workshop in order to get the necessary permission.

No trainee will be allowed to _____________________ without proper authorization. Each trainee will be finger printed, on booking in, this print method to be used to enter/exit through the main entrance at the turnstile. If for any reason a trainee is late, they will not be permitted to enter, but must fill in an absentee report to be allowed in. On completion of his training cycle at the centre, the trainee must report to Booking Co-ordinator who will remove his finger print from the system.

ATI’s training methodology uses self-study, where the learner is required to complete their training within a prescribed time period. All the training is _______and learners are given clear time indications to complete their training. The ETDP are available to assist when problems are encountered, and to monitor and conduct practical demonstrations. Learners should ask questions and inform the ETDP when he or she is ready for an assessment to take place. The ETDP will then conduct the assessment.

Each learner must obey the relevant ______________________, and no learners are allowed to be in workshops they are not assigned to for training.
Take note of all the different departments and their inner workings. Pay attention to the area you are assigned and adhere to the rules and regulations at all times.

All learners must ensure they sign the workshop register before 09H00 every morning. Any person that did not sign the register, will be marked as absent for that day. Learners that arrive late will be required to complete a ________________before they will be allowed to continue with their work.