0 of 10 questions completed
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
The service unit is always located on the output side of the pneumatic installation
The air must be enriched by oil so that it can lubricate the component parts by means of a lubricator
The filter is normally combined with a pressure regulator& lubricator to form a compressed air service unit
All the contaminants in the air must be removed & the water must be trapped & drained. This is done by fitting a filter with no water separator.
For some components lubricated air is damaging, for others, it is undesirable, but for power components it in my certain cases be necessary.
The compressed air filter has the function of removing all the contaminants from the compressed air flowing through it, as well as __________ which has already condensed.
The input pressure (primary pressure) at the regulator must always be _________ than the output pressure (secondary pressure).
The purpose of the ________is to keep the operating pressure of the system virtually constant regardless of fluctuations in the pressure and the air consumption.
The purpose of the lubricator is to deliver the metered quantity of _______ mist into a leg of air distribution system.
The service unit is always located on the _______ side of the pneumatic system